Series 930 – IP65 Fixed VOC Monitor
The Series 930 IP65 Fixed VOC Monitor is a flexible monitor designed to measure and control concentrations of volatile organic compounds (VOCs) in air. Compatible with four different types of swappable VOC sensor heads. Suitable for use on a range of projects, including health and safety monitoring, process control, and leak detection.
Compatible with four different types of VOC sensor heads, plus temperature and humidity
Flexible outputs enable use as a relay controller, gas transmitter, or monitoring network
Optional integrated display for reporting real-time gas concentrations
Product overview
The Series 930 enables flexible use due to a wide range of outputs and configurations. The monitor can operate in three ways:
As a relay controller via the integrated relays and user configurable set points to control an external device such as an ozone generator or initiate an alarm.
As a VOC transmitter via the 4-20 mA output which allows connection to a PLC or current sensing device to provide gas concentration information for applications such as health and safety monitoring.
As a monitoring network via the RS485 digital output to enable gas monitoring at several indoor locations with information being logged to a central point.
There is the option to include an integrated display for reporting real-time gas concentrations, and/or an optional strobe and siren kit which can be configured to activate to a user defined set point. A temperature and relative humidity sensor can also be included, if required.
While in use, the swappable sensor head is housed in a robust IP41/NEMA 2 rated water-resistant enclosure protecting it from water damage. The monitor is easy to install due to the lightweight enclosure and provided wall mounting kit. It requires a 24V power supply, which is user-supplied, to allow flexibility in installed locations.
There is also free to download configuration and networking software available under the downloads tab. The configuration software allows for quick and easy configuration of the alarm and control set points. The networking software can be used to log data from a network of monitors to a single PC.
What can it measure?
The Series 930 IP65 Fixed VOC Monitor is capable of measuring a range of VOC concentrations, using our swappable sensor head technology.
This product includes:
Series 930 monitor base
4-20mA analog output
RS485 digital output
Low alarm, High alarm, Control and Diagnostic external signal functions
Integrated relays
VOC sensor head with calibration certificate (requires specifying)
Wall mounting kit
Optional accessories:
Temperature and relative humidity sensor
Integrated display
Configurable strobe and siren kit
Key benefits of Aeroqual products
Industry-leading sensor technology
As sensor manufacturers, we know sensors inside and out and have unparalleled expertise in optimizing performance in real-world conditions.
Powerful software platform
Leveraging deep integration with our monitoring systems, we deliver software functionality unmatched by off the shelf data acquisition systems.
Value-adding services
Using proprietary system diagnostics, we enable proactive maintenance with hassle-free services that virtually eliminate system downtime.
Who is it for?
Employers, health and safety managers, and air quality professionals use the Series 930 IP65 Fixed VOC Monitor to ensure sensitive receptors are not at risk from exposure to VOCs in air.
Practical applications for the Series 930 IP65 Fixed VOC Monitor include:
Health and safety monitoring
Process control
Leak detection
Real-time network monitoring
Working with your sector
Related products
Case studies
Case Study - Industrial Hygiene
Defensible VOC Monitoring Reduces Risk for Oil and Gas Client in Colorado
Case Study - Communities
University Research Study Tracks Air Quality Microsites Using Real-Time Data
Case Study - Communities
Co-location Study Convinces Government Agency to Invest in Sensor-Based Monitoring
Optional accessories
Specifications
Software downloads
Download the Aeroqual network software here.
FAQs
The Series 900, Series 930 and SM70 Fixed Indoor Air Quality Monitors are compatible with different types of sensor heads.
Series 900 fixed monitors are compatible with Type 1 sensor heads (interchangeable)
Series 930 fixed monitors are compatible Type 2 sensor heads (removable/ replaceable)
SM70 fixed monitors have user-defined sensor modules (removable / replaceable)
Series 900 Fixed Monitor
The Series 900 Fixed Monitor is compatible with all available gas sensor heads in our range.
To view the full list, visit the Series 900 Fixed Monitor product page, or view the Portable and Fixed Monitor Sensor Spec Sheet.
Series 930 Fixed Monitor
Ammonia Sensor 0-100ppm
Carbon Monoxide Sensor 0-25ppm
Carbon Monoxide Sensor 0-100ppm
Chlorine Sensor 0-10ppm
Formaldehyde Sensor 0-10ppm
Methane Sensor 0-10000ppm
Hydrogen Sulfide Sensor 0-10ppm
Nitrogen Dioxide Sensor 0-1ppm
Ozone Sensors 0-0.05ppm, 0-.15ppm, 0-0.5ppm, 0-10ppm
Sulfur Dioxide Sensor 0-10ppm
Sulfur Dioxide Sensor 0-100ppm
VOC Sensor 0-25ppm
VOC Sensor 0-20ppm
VOC Sensor 0-2000ppm
SM70 Fixed Monitor
Ozone sensor modules:
0-0.15ppm
0-0.5ppm
0-10ppm
No. The PM10 / PM2.5 sensor head is only compatible with the Portable Monitors.
Alternatively, please contact us to discuss your specific requirements further.
Series 900 Fixed Monitor
The Series 900 is a base unit and does not have an enclosure.
Series 930 Fixed Monitor
The Series 930 enclosure is Polycarbonate/ IP41* NEMA 2** equivalent.
*IP 41 Rating: Protected from tools and small wires greater than 1 millimeter. Protected from condensation.
**NEMA 2: Indoor use to provide a degree of protection against a limited amount of falling water and dirt.
SM70 Fixed Monitor
The SM70 Fixed Monitor enclosure is Polycarbonate/ IP20* NEMA 1** equivalent.
*IP20 Rating: Protected from touch by fingers and objects greater than 12 millimeters.
**NEMA 1: Indoor use primarily to provide a degree of protection against contact with the enclosed equipment and against a limited amount of falling dirt.
How do I calibrate my Fixed Monitor sensor heads?
We recommend that sensor heads be calibrated at least once a year.
Series 900 Fixed Monitor – Type 1 Sensor Head
Factory calibration. Return sensors to Aeroqual for a multi-point calibration and new calibration certificate. Please contact our support team.
Manual calibration. Gas sensors only. Please refer to our page on portable monitor calibration.
Series 930 Fixed Monitor – Type 2 Sensor Head
Factory calibration. Return sensors to Aeroqual for a multi-point calibration and new calibration certificate. Please contact our support team.
SM70 Fixed Monitor Ozone Sensors
The sensor board must be replaced when the SM70 Fixed Monitor Ozone sensor is due for calibration. Please contact our support team, and provide the serial number of your monitor.
What are the different output types?
Series 900 and Series 930 Fixed Monitor
Analogue output: 4-20mA (opto-isolated), 12-24V
Digital output: RS232 and RS485
SM70 Fixed Monitor
Analog output: 0 – 5 VDC (8 bit)[AO1] / 0-1.5V (UZ sensor board)
Digital output: RS232 and RS 485
Relay output: 24V; 5A(max.)
Can I use these the fixed monitor with my own software?
The user guide for each of the Fixed Indoor Air Monitors contains the relevant protocol commands for integrations into third party systems. User guides can be found on the Technical Documents page.
Product Support
For support on your S930 instrument, click here to visit our support centre.
Air monitoring made easy
Take the time and hassle out of your next project with a real-time air quality monitoring solution.